Yes : ✔ No : ✖ Good : ●●● Fair : ●● Poor : ● |
GENERAL CONDITION |
Machine Starts and is Operable | ✔ |
S.O.S. (All Compartments) | ✖ |
GENERAL APPEARANCE |
Cleaning Required | ✔ |
SAFETY ITEMS |
Horn | ●● |
ROPS | ●● |
OPERATOR STATION |
Current O&MM | ✖ |
Current Parts Manual | ✖ |
Current Safety Manual | ✖ |
ENGINE |
Apparent Other Engine Damage | ✖ |
Knocking | ✖ |
Water in Oil | ✖ |
ELECTRICAL, STARTING AND CHARGING SYSTEM |
Alternator | ●● |
Batteries / Cables | ●● |
Starter | ●● |
Wiring | ●● |
TRANSMISSION |
Water in Oil | Did not put machine in gear due to final drive issue. Transmission oil samples were clean. |
STEERING |
Water in Oil | Did not move machine |
HYDRAULICS |
Leaks - HYDRAULICS | ✔ |
BLADE |
Cutting Edge & Bits | ●● |
Face / Moldboard | ●● |
Pins | ●● |
Push Arm | ●● |
Spill Rack | ● |
Trunnions | ●● |
RIPPER / GRAPPLE / WINCH |
Ripper Lift Cylinder | ● |
Ripper Tilt Cylinder | ● |
Shanks / Get | ●● |
UNDERCARRIAGE |
Pins & Bushings Turned? | ✖ |
FINAL DRIVES |
Pins & Bushings Turned? | Right hand final drive had no oil. Appears to have a crack in the housing near the segment flange. |
COMMENTS, MISC. REPAIRS, GENERAL REMARKS |
Pins & Bushings Turned? | Customer just put about 500 hours on the machine on this job. Said machine runs and operates well. All of the cylinders on the machine are leaking except the left hand lift cylinder. |
Pins & Bushings Turned? | Right hand final drive has no oil in it and appears to have a crack in the housing near the segment flange. |
Pins & Bushings Turned? | Started machine, but did not move it due to the final drive issue |